Details about the Asus A6000 Battery and Adapter

The Asus A6000 Battery is an 8-cell Li-ion type battery with a capacity of 4400 mAh. It supports a voltage of 14.8 and is normally black in color. The dimension of this battery is 267.60 x 49.20 x 21.22 mm and has a net weight of 392.00g. The new battery is provided in a discharged state and should be charged before its use. To achieve maximum capacity, two to three discharges or charge cycles are needed.

Before one can decide on purchasing a replacement adapter, looking at the input and output voltages of the original AC adapter is necessary. Since this power cord has a 19V output voltage, laptops whose output voltages lies between 18V to 20V can also use it. Those with an input voltage ranging between 15V to 17V are compatible with the adapter as its output voltage is 16V. This means that users are advised to exceed a tolerance of ±1V. Those who acquire power cords with wrong output voltage risk damaging their laptops.

The battery for A6000 is charged by an AC Asus A6000 adapter also known as a laptop power cord or power supply. The specifications of this power cord are as follows: power of 90W, input voltage ranging from 100V to 240V and an output current of 4.74A. The adapter is rigorously tested to meet the specifications of the original ASUS A6000 laptop and is given a ±1V Voltage allowance.

There is a simple formula for choosing a replacement AC adapter. The output voltage of the original AC adapter can be calculated by multiplying the output current in Amperes with its output voltage in volts (i.e. multiply 19Volts by 4.74Amperes which gives 90 Watts). It is possible to opt for an adapter that has a higher current rating than that which the original adapter had as opposed to acquiring one that has a lower current rating. The load ratings of the computer are determined by its output power and its output current. They draw as many watts or amperes as they need and thus a highly rated adapter cannot damage your laptop.

This Asus battery is made of A-grade cells such as Samsung, BAK, Sanyo and many more. This makes it to have a lower inter-resistance and a higher capability. Since it has double IC PCB protectors, full charge/discharge cycles of over 500 are possible. It has chips in its internal circuit board that facilitates communication with the laptop when monitoring its performance, temperature and output voltage. This allows the user to know the left battery run-time and recharge appropriately. The battery can fit into several laptop models and thus users are advised to check whether it is compatible with their computer.

Checking whether the tip size of the adapter correctly fits into your computer is another factor to consider. If you still have the original adapter, look at its part number and the model number of your laptop. This power cord has an input frequency of 50-60HZ and it’s normally black in color. This Asus laptop adapter for A6000 can replace models with different part numbers. Some of them include the following: Delta ADP-90SB BB, 90-N00PW4C00T, 90-N6EPW2012, 90-N00PWA500Y, 90-N6EPW2000, SADP-65KB B, 90-N6EPW2010, 90-N00PW4E00T and 90-N00PWA600Y.

 Article Source:http://enwholesale.typepad.com/blog/2013/07/details-about-the-asus-a6000-battery-and-adapter.html

---

For the original version visit:  best cheap  Eee PC 1005 Battery for most of the top brands of notebooks on http://www.batteriesshop.com.au